Audio Technica AT4050SM Multi Pattern Condenser Microphone
November 30, 2017
Stagg Vintage Bronze 16 inch Thin Crash Cymbal
December 1, 2017

Audio Technica AT2035-Studio Recording Pack

£299.00 (Inc VAT)

The Audio Technica AT2035-Studio is an exclusive recording bundle by Audio-Technica and Audient worth over £900. The bundle combines the natural sounding AT2035 microphone paired with ATH-M40x studio headphones which go through console preamp the Audient ID4 USB Audio Interface. Everything you need is in the box including cables, a microphone mount and carry cases.

Out of stock

You have not viewed any product yet.

Features of the AT2035-Studio bundle include:

  • AT2035 Cardioid Condenser Microphone delivers exceptional detail and low noise
  • ATH-M40x Professional Monitor Headphones are tuned flat for incredibly accurate audio monitoring across an extended frequency range
  • Audient iD4 Black audio interface with console mic pre delivers the audio performance of a large format console in a portable desktop package enabling you to record your vocals and guitar simultaneously



Type Closed, dynamic
Driver Diameter 40mm
Magnet Neodymium
Voice Coil CCAW (Copper-clad aluminum wire)
Maximum Input Power 1,600 mW @ 1KHz
Sensitivity 98 dB/mW
Impedance 35 ohms
Folding/collapsible Yes
Weight 240g (without cable)
Cable – Detachable Yes
Connector Gold-plated stereo 1/8” (3.5 mm) connector with 6.3 mm (1/4”) screw-on adapter
Accessories Included 6.3 mm (1/4”) screw-on adapter, Pouch


Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 20 – 20,000 Hz
Open Circuit Sensitivity -33 dB (22.4 mV) re 1V at 1 Pa
Impedance 120 ohms
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Low Frequency Roll Off 80 Hz, 12 dB/octave
Dynamic Range 136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 82 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3.8 mA typical
Weight 403g
Dimensions 170.0 mm (6.69″) long, 52.0 mm (2.05″) maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8458 shock mount for 5/8″-27 threaded stands; 5/8″-27 to 3/8″-16 threaded adapter; soft protective pouch


There are no reviews yet.

Be the first to review “Audio Technica AT2035-Studio Recording Pack”

Your email address will not be published. Required fields are marked *

You have not viewed any product yet.