Shure BLX188/SM35 Dual Headset Wireless System

OVERVIEW

The BLX188/SM35 Wireless Dual Headset System with two SM35 features a durable, industry-standard microphone cartridge in a comfortable headset design for hands-free performance combined with simple setup and an intuitive interface for performance you can trust.

FEATURE

MAIN FEATURES

• Available Transmitter Form factors: Bodypack
• Operating range (up to): 100 m (Under typical conditions)

BLX1

• Power and battery status LED
• Adjustable gain control
• Quick and easy frequency matching
• AA batteries (included) provide up to 14 hours of continuous use
• 100 m (300 ft.) operating range (line of sight)

BLX88

• Up to 12 compatible systems (region dependent)
• Microprocessor-controlled internal antenna diversity
• One touch QuickScan locates the best open Frequency
• ¼” and XLR audio outputs
• Two color audio status indicator LED
• Green: Normal audio levels
• Red: Excessive audio levels (overload/clipping)

SM35-TQG

• Wearable wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
• Tight, unidirectional (cardioid) condenser pickup pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
• Flexible gooseneck design allows for optimized placement to further improve source isolation
• Lightweight and low-profile form enables comfortable, long-wearing use
• TA4F connector compatible with any Shure wireless bodypack system
• Included in a wide variety of Shure wireless systems, renowned for their ease of use and reliable performance
• Locking snap-fit windscreens tame plosives, breath and wind noise for clean and intelligible sound
• Tailored frequency response refined for clear, crisp vocal reproduction
• Legendary Shure precision engineering for durability and performance

Specifications

BLX188/SM35 Specifications

• Set Type: Dual Headset
• Amount of Bodypacks: 2
• Amount of TQG Mics: 2
• Number of compatible systems per frequency band: 12BLX88 Specifications
• Weight: 429 g
• Height x Width x Depth: 40.0 × 388.0 × 116.0 mm
• Transmission: Analog
• Type of Power Supply: External
• Receiver Housings: Molded ABS
• Active Antenna Possible: No
• Bias via BNC: No
• High Density Mode: No
• Interference Detection: No
• Remote Control: No
• Number of compatible systems per frequency band: 12
• DANTE Audio Network Interface: No
• Scan Features: Quick Scan
• Detachable Antennas: No
• Logic: No
• Cascade: No
• Rack Hardware: Optional: URT2
• Receiver Displays: LEDs
• Receiver type: Dual
• Line Mic Switch: No
• Image Rejection: 50 dB, typical
• RF Sensitivity: -105 dBm, for 12dB SINAD, typical
• Phantom Power Protection: NoBLX1 Specifications
• Weight: 75 g
• Height x Width x Depth: 110.0 × 64.0 × 21.0 mm
• Battery life alkaline: 14 h
• Form Factor: Bodypack
• Operating Range (up to): 100 m (Under typical conditions)
• Transmitter housings: Molded ABS
• Audio Mute: No
• Detachable Antennas: No
• Switchable RF power: No
• Batteries: AA
• Battery Status: Multi-Color LED
• Connectors: TQG
• Frequency Diversity: No
• Functionality: Transmitter
• Gain adjustment range: 26 dB
• High Density Mode: No
• Included antenna: 1/4 wave
• Input impedance: 1000 kΩSM35-TQG Specifications
• Weight: 72 g
• Frequency Response: 40 Hz – 20 kHz
• Frequency Response: Tailored
• Sensitivity: -59 dBV/Pa – 1.1 mV/Pa
• Equivalent Selfnoise: 39
• Sound Pressure: 153
• Transducer Type: Condenser
• Polar Pattern: Cardioid
• Switchable low cut: No
• Connectors: TQG
• Attenuator: No
• Interchangeable Capsule: No
• Main Functionality: Performance
• Headphone Output: No
• Requires Phantom Power: +5 V DC (nominal),10 V maximum (DC bias) VDC
• Cartridge: Fixed